Are you perfectly aware that your gearbox is working in the wrong way? Know one thing, delaying the detection of the problem and its solution can really cost us a lot, especially if we completely damage the entire gearbox over time, which, as we know, it is better not to allow it.
Of course, each gearbox consists of many parts and components that ensure its proper operation, so without visiting a mechanic in such a situation will be impossible. Most often, it is one of them that causes such problems, an excellent example of which is the gearbox controller, which is not only to allow us to change gears without any problems and to be regular in this regard, but also to supply the entire gearbox with oil in an appropriate manner.
Therefore, if we feel a strange slippage or jerking, it is very likely that the gearbox controller has just been damaged or worn. As mentioned above, the reaction time and operation are of crucial importance when it comes to the further negative influence of the controller itself on the operation of the entire gearbox. So let’s try to decide as soon as possible to replace and purchase a new or used gearbox controller, which in the latter case is not such a bad solution.
Where did the gear shifting problems come from?
Problems with the gearbox are one of the most common ones that we encounter during the operation of the car, so their solution is something worth thinking about, especially if you do not want to find out how much it costs to replace the entire gearbox. If the driver has crashed, there is nothing to prevent you from deciding to obtain a used one, such as can be found on the website https://www.worldecu.com/en/salespeed-transmission-ecu-gearbox . Sure, we are talking not only about proven car parts, but also those whose further use is still possible, with simultaneous evaluation of their technical condition by professionals. So you can say that the decision to buy a used gearbox controller is not bad at all, on the contrary, it will save us our money.